Quick Answer: Should You Put Plastic Over Insulation?

Is attic insulation bad to breathe?

Respiratory Problems Improper attic insulation can cause chemical off-gassing.

Inhaling the particles for extended periods can cause serious respiratory problems, including breathing difficulties and frequent asthma triggers..

What happens if you don’t use vapor barrier?

If water vapor diffuses or infiltrates into the wall cavity and finds the cool surface, moisture problems can occur. Of course, you can have moisure problems here even without the exterior vapor barrier because of what Bill Rose calls the rule of material wetting.

Where should vapor barrier be placed?

In order to prevent condensation from forming, a vapor barrier should be placed on the warm side of your insulation to stop warm, moist air from condensing on a cold surface inside your wall. In cold climates like Canada, for most of the year the vapor barrier should be on the inside of the insulation.

What do you cover insulation with?

Things You’ll Need Most insulation is made of fiberglass and fits into the walls between the studs before drywall is installed. After the insulation is installed, it is necessary to cover it up with a vapor barrier so the glass fibers are not inhaled. The best vapor barrier to use is roll of plastic sheeting.

Do vapor barriers cause mold?

The Problem With Vapor Barriers The original reason for using vapor barriers was a good one: to prevent wall and ceiling assemblies from getting wet. … This can lead to significant moisture problems and mold; problems occur when walls get wet during construction or more often throughout the home’s life.

Can breathing in insulation kill you?

There is no evidence currently of long-term damage from inhaling fiberglass particles, and workers who come into regular contact with fiberglass insulation are not considered to be at any higher risk of lung and breathing problems, especially if they wear proper safety attire.

Does fiberglass stay in your lungs forever?

Inhaled fibers are removed from the body partially through sneezing or coughing, and through the body’s defense mechanisms. Fiberglass that reaches the lungs may remain in the lungs or the thoracic region. Ingested fiberglass is removed from the body via feces.

Can you use plastic sheeting as a vapor barrier?

In simple terms, a vapor barrier is a material that won’t allow moisture to pass through it, such as plastic sheeting. … It’s designed to stop the moisture before it can enter the wall cavities. There are two basic types of vapor barriers used with exterior wall insulation. The most common is paper-faced insulation.

Should I cover my insulation with plastic?

The exposed fiberglass insulation is fire code in most states. … Fiberglass insulation will not degrade unless exposed to water. The fiber could become airborne if a vent is blowing on it or it is disturbed in some way. It can be covered with a plastic vapor barrier to protect your home air quality.

Do I need a vapor barrier over my insulation?

After the insulation is in place you will want to add a vapor retarder, sometimes called a vapor barrier, if you need one. Not every wall does. A vapor retarder is a material used to prevent water vapor from diffusing into the wall, ceiling or floor during the cold winter.

Is it OK to touch insulation?

Dangers from Exposed Insulation Skin irritation – Fiberglass is a skin irritant. Even if you are not touching the insulation, it can send particles into the air that can irritate the skin. … They may touch the fiberglass and increase their risk of problems.