Question: Why Does Dish Say No Signal?

Dish Network signal loss occurs when your satellite dish is not correctly picking up the signal, which is beamed from orbiting satellites.

You may also see a message on your TV that says “No Signal” that is not related to the satellite.

Wind and rain can affect your satellite signal.

How do you fix a dish TV when it says no signal?

To perform a power reset, unplug the receiver from the power outlet for 10 seconds, and then plug it back in. The power cord usually has a red tag, so you can easily identify it. If you are still experiencing an issue, please chat with us online at or call us at 1-800-333-3474.

What does no signal mean on DISH Network?

This issue is typically a result of the TV being on the wrong input or having cables connected incorrectly. We’ll have you check some connections between your equipment and make sure the receiver is plugged in all the way. Try these quick troubleshooting steps to resolve the issue and get back to watching TV!

What does it mean when your cable says no signal?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

How do I get Dish TV signal?

Dish TV Signal Setting

Go into the Installation Menu for your Dish TV box by pressing the “1” button and then press the “1” button again to access the section to point your dish. On the Point Dish section of the Setup Menu, press the “Down” or “Up” buttons on your remote to change your Dish satellite’s number to 119.

How do I reboot my Dish TV?

How-To: Reset Your Dish TV HD Set Top Box for Better Performance [With Pictures]

  • Step 1: On your set-top box remote, press and hold the “Menu” button.
  • Step 2: In this menu, select the “System Setup” menu item and press “OK”.
  • Step 3: In the “System Setup” menu screen, select the “Erase EPG” menu item and press “OK”.

Can you get a satellite signal through trees?

Satellite Dishes Need Line of Sight

The satellite dish needs “line of sight” of the satellites in space. This means that nothing can be blocking the signal between the satellite and satellite dish or you will have poor satellite TV reception. So trees on opposite direction will have no affect on the satellite signal.

How do I fix no signal?


-Remove the HDMI cable or other cables from your Cable TV or SAT set top box. -Keep the cable unplugged for 2 to 3 minutes. -Plug the HDMI cable or other cables back in. -Give it some time for the Cable or SAT box to get the signal and initialize.

What does no signal mean?

“No Signal” is a message coming not from your computer, but from your display device, indicating that it has nothing to display.

Why is my antenna not finding channels?

Possible causes: Once you have properly installed the antenna, changed the input on your TV to ‘ANTENNA’, and run a channel scan, you should be receiving at least some of your local channels. If this is not the case, the reason could be one of the following: There is not a clear line of sight to the broadcast towers.